Skip to content
EST. 1989 TRADE PRICING (EXCL. VAT) • B2B QUOTATION PORTAL
SLV ARCHITECTURAL LIGHTING · 12V AC SELV LOW-VOLTAGE TENSIONED CABLE SYSTEM

TENSEO® 12V Low-Voltage Wire System Configurator

Design a complete SLV TENSEO® 12V SELV Parallel Wire Run in seconds. Choose a Wall-to-Wall, Wall-to-Ceiling, or Ceiling-to-Ceiling straight run in Matt Black, Matt White, or Chrome / Transparent. The configurator automatically doubles your room span (2 × Span) for the parallel 155 mm-spaced wire pair, enforces SLV's 4 mm² vs 6 mm² voltage-drop table, pairs Interchangeable GU5.3 (MR16) Socket or Integrated 2700K LED luminaires, and locks in the mandatory Brass Power Feed-In Clamps & 12V AC Surface Transformer.

155 mm Parallel Wire Spacing 2 × Span Auto Cable Doubling 4 mm² & 6 mm² Voltage-Drop Verified GU5.3 Socket or Integrated LED 66 Active TENSEO® System SKUs
01

Select Installation Topology & System Finish

Wall-to-Wall · Wall-to-Ceiling · Ceiling-to-Ceiling

System Hardware & Cable Insulation Colour

Every TENSEO® cable roll, tensioner, luminaire, power feed-in, and transformer is colour-coordinated across Matt Black, Matt White, or Chrome / Transparent.

Straight-Run Mounting Topology (155 mm Parallel Wire Spacing)

Select how the parallel wire pair is anchored at both ends (Wall-to-Wall horizontal span, Wall-to-Ceiling transition, or Ceiling-to-Ceiling suspended run).

02

Select Run Span (m) & Cable Gauge (Auto-Doubles Parallel Wire: 2 × Span)

Choose a standard run length (3.5 m, 5 m, 7.5 m, or 10 m) or enter your own custom length in metres. Because TENSEO® uses two parallel conductors spaced 155 mm apart, a 5 m run requires 10 m of cable and a 10 m run requires 20 m of cable.

03

Select End Fixings, Ceiling Deflector Height & Anti-Sag Supports

End Tensioning Brackets & Ceiling Deflector Standoffs

Wall-to-Wall runs include 10 cm clamping tensioners + 3 cm anchors (with optional inline brass turnbuckles). Ceiling runs let you choose 6 cm Short, 16 cm Long, or 16 cm Pulley Deflectors.

Mid-Span Anti-Sag Ceiling Support / Cross-Spacer (Recommended Over 5.0 m)

For spans over 5.0 m (or heavy spot loads), SLV recommends an intermediate ceiling cable guide, 2 m high-ceiling wire suspension kit, or mechanical cross-spacer bar.

04

Select TENSEO® Luminaires (Interchangeable GU5.3 Socket vs Integrated LED)

TENSEO® Luminaire Family — Add Fittings Directly Inside Each Product Box

Use the − / + controls inside each luminaire box to add or adjust the number of fittings along your wire run. Choose between replaceable GU5.3 / MR16 socket fittings (ASMARA V-Drop, TELESKOP Adjustable Stem, or COSMIC Wire Bridge Twin-Pack) and factory-sealed 2700K LED fittings (NOBLO® SPOT or DURNO Gimbal Disc).

05

Select 12V AC GU5.3 (MR16) LED Lamps (Socket Models)

Auto-matched to your spot quantity for ASMARA, TELESKOP, and COSMIC socket luminaires (or automatically bypassed for NOBLO® and DURNO integrated LED models).

06

Select 12V AC Surface Transformer & Mandatory Power Feed-In Clamps

1. 12V AC Surface Toroidal Transformer (50 VA / 105 VA / 210 VA)

Automatically sized to your total connected luminaire wattage (50 VA up to 45W, 105 VA up to 95W, or 210 VA up to 190W), or exclude if using a remote 12V AC transformer.

2. Mandatory 12V Power Feed-In Clamp Set & Optional Dual-Zone Isolator

Every TENSEO® circuit requires a dedicated Power Feed-In (186350–52 or 1002703–05) to connect the transformer secondary leads to the tensioned cables — you cannot wire the tensioned cable directly into the transformer.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
⚡ Intalite UK · Wimbledon B2B Trade Desk

Submit for B2B Trade Quotation

Submit your lighting schedule or product enquiry below for an official Intalite UK Trade Quotation or Trade Account Application.

Wimbledon Trade Desk:
✓ Official Intalite UK B2B Trade Terms ✓ Fast Quotation PDF (0208 542 1471) ✓ Technical Specification & Track Verification
Intalite UK Trade Desk Need a Trade Quotation? Message us or call 0208 542 1471